AAC light weight blocks dealer for Coimbatore, Tirupur, Erode and Nilgiris district
Aerocon Blocks has been produced for more than 70years, and it offers several significant advantages over other cement construction meterials, one of the most important being its lower environmental impact
Improved thermal efficiency reduces the heating and cooling load in buildings
Workability allows accurate cutting, which minimizes the generation solid waste during use
Resource efficiency gives it lower environmental impact in all hases of its life cycle, from processing of raw materials to the disposal of waste.
Light weight saves cost & energy in transportation
Light weight saves labour expenses
Light weight increases chances of survival during seismic activity
Both blocks are panels are available. Blocks are stacked similarly to conventional masonry, but with a thin-bed mortar, and panels are stood vertically,spanning full-story heights.
Panels extend from floor to top of the wall:
Height : Up to 20ft
Width : 25in
Thickness : 6,8,10 and 12in(4in thick interior partition panels are available)
Blocks are larger and lighter than traditional concrete masonry:
Height: 8in. typical
Width: 24in. long
Thickness: 4,6,8,10, and 12in.
A standard: 8x8x24in. unit weighs about 33lbs.
U-Shaped bond beam or lintel blocks are available in thicknesses of 8,10 and 12in tongue and groove vlocks are available from some manufacturers, and these connect to adjacent units without at vertical edges
Cored blocks available for creating vertical reinforced grouted cells